New Comacchio Geotech Rigs and
Anchoring Rigs in stock or
arriving soon
Drilltechniques is proudly the exclusive Australian and New Zealand Dealer for Comacchio Drilling Equipment. See our range of stock machines either in Australia already or arriving soon:
World Leading Equipment Manufactured by
Since 1968, the three Comacchio brothers took on the challenge that would bring them to hold a prominent position, worldwide, in the drilling market. Drilltechniques is proud to be a part of this incredible story of technological innovation, professionalism, experience and passion for work. We offer not only the Comacchio products, but the after sales service and parts to match.
Current Offerings EQUIPMENT IN STOCK!
Available for Immediate Delivery
Comacchio GEO 205
SN 5027
| GEO 205 SN 5027 Technical Specification | |
| Engine Power | 33 kW (44 HP) |
| Variable Width Undercarriage Weigth | 750 - 1,150 mm |
| Weight | 3,600 Kg |
| Modular Mast (Max) Heigth | 3,755 mm |
| Modular Mast (Max) Stroke | 2,590 mm |
| Modular Mast (Min) Height | 2,355 mm |
| Modular Mast (Min) Stroke | 1,190 mm |
| Crown Block Extension | Handle 3 m rod length |
| Feed Force | 2,500 daN |
| Retract Force | 2,500 daN |
| Rotary Torque Max | 3,100 Nm |
| Rotary Speed Max | 700 rpm |
| Double Clamps Range | 45 - 220mm |
| Wireline Winch Line Pull (Max) | 800 Kg |
| Triplex Pump Spec | 120L/min @ 30 bar |
| Service Winch Line Pull | 1,000 Kg |
| Auto SPT | |
| Radio Remote control drilling and tracking | |
Arriving in Australia early May 2025
Comacchio MC 8
SN 4941
| GEO MC8 SN 4941 Technical Specification | |
| Engine Power | 38 kW (115 HP) |
| Variable Width Undercarriage Weigth | 1,400 - 1,800 mm |
| Weight | 8,500 Kg (approx.) |
| Modular Mast (Max) Heigth | 4,925 mm |
| Modular Mast (Max) Stroke | 3,500 mm |
| Modular Mast (Min) Height | 3,625 mm |
| Modular Mast (Min) Stroke | 2,200 mm |
| Feed Force | 5,000 daN |
| Retract Force | 5,000 daN |
| Rotary Torque Max | 13,500 Nm |
| Rotary Speed Max | 155 rpm |
| Double Clamps Range | 45 - 325 mm |
| Wireline Winch Line Pull (Max) | 1,000 Kg |
| Radio Remote control drilling and tracking | |
Arriving in Australia early May 2025
Comacchio GEO 305
SN 5312
| GEO 305 SN 5312 Technical Specification | |
| Engine Power | 55.4 kW (75 HP) |
| Variable Width Undercarriage Weigth | 1,400 - 1,700 mm |
| Weight | Approx 5,000 Kg |
| Mast Height | 5,100 mm |
| Mast Stroke | 3,500 mm |
| Crown Block Extension | Suitable for handling 6m rods |
| Feed Force | 5,000 daN |
| Retract Force | 5,000 daN |
| Rotary Torque Max | 6,300 Nm |
| Rotary Speed Max | 750 rpm |
| Double Clamps/Breakout Range | 45 – 305 mm |
| Double Clamps Casing Extractor | 10,000 daN – 300 mm stroke |
| Wireline Winch Pull (Max) | 800 Kg |
| Service Winch Pull (Max) | 2,000 Kg |
| Triplex Pump Spec | 160 l/min @ 50 bar |
| Auto SPT | DPP Percussion hammer option |
| Radio Remote Control Drilling/Tracking | Rod Pack on side of rig |
| DTH Lubricator | Hydraulic air-gate valve |
Arriving in Australia June 2025
Comacchio GEO 405
SN 5317
| Comacchio GEO 405 SN 5317 Technical Specification | |
| Engine Power | 74 kW (99 HP) |
| Fixed Width Undercarriage (Steel with Rubber Pads) | 1,500 mm |
| Weight | Approx 6,000 kg |
| Mast Height | 5,250 mm |
| Mast Stroke | 3,500 mm |
| Crown Block Extension | Suitable for handling 6m rods |
| Feed Force | 4,500 daN |
| Retract Force | 6,500 daN |
| Rotary Torque Max | 6,300 Nm |
| Rotary Speed Max | 870 rpm |
| Double Clamps/Breakout Range | 45 – 325 mm |
| Wireline Winch Pull (Max) | 800 Kg |
| Service Winch Pull (Max) | 2,000 Kg |
| Triplex Pump Spec | 160 l/min @ 50 bar |
| Auto SPT | DPP Percussion hammer option |
| Radio Remote Control Drilling/Tracking | Rod Rack with slide cylinder |
| DTH Lubricator | Casing extractor cylinder (9,600 Nm) |
Arriving in Australia June 2025
Comacchio MC 12
SN 5318
| Comacchio MC 12 SN 5318 Technical Specification | |
| Engine Power | 95 kW (127 HP) |
| Fixed Width Undercarriage (Steel): | 2,100 mm |
| Weight | Approx 12,500 kg |
| Modular Mast Height: | 4,283 – 5783 mm |
| Modular Mast Stroke: | 2,540 – 4,040 mm |
| Feed Force | 5,400 daN |
| Retract Force | 5,400 daN |
| Rotary Torque Max | 1,350 daN |
| Rotary Speed Max | 155 rpm |
| Double Clamps/Breakout Range: | 45 – 325 mm |
| Service Winch Pull (Max): | 2,000 Kg |
| Rod Carousel capacity: | 6 Rods X 3.0 m Max Handling Ø 90mm |
| Radio Remote Control Functions: | Drilling – Tracking - Set-up - Rod Carousel |
| Other Accessories include: | |
| Electro-hydraulic Air Gate Valve | Timing device for jet grouting mode |
| DTH Lubricator | Hydraulic settings for Drifter |
| On-board Pump and High-pressure Washing Kit | |
Drilltechniques is proud of its partnerships with some of the worlds most renowned manufacturers of Drilling Equipment such as Comacchio and Techniwell. Whether you are seeking quality equipment to conduct drilling operations for bored piers, CFA, anchoring, geotechnical, exploration, geothermal, well drilling or earthing, Drilltechniques can assist with high technology and high quality equipment. We also support drilling methods like Jet Grouting and CFA with material supply, mixing, grouting and pumping solutions.
If you would like to know more about the full range of equipment we offer, please choose from the relevant area above or call or email drillsales@drilltechniques.com.au.