New Comacchio Geotech Rigs and
Anchoring Rigs in stock or
arriving soon
Drilltechniques is proudly the exclusive Australian and New Zealand Dealer for Comacchio Drilling Equipment. See our range of stock machines either in Australia already or arriving soon:
World Leading Equipment Manufactured by
Since 1968, the three Comacchio brothers took on the challenge that would bring them to hold a prominent position, worldwide, in the drilling market. Drilltechniques is proud to be a part of this incredible story of technological innovation, professionalism, experience and passion for work. We offer not only the Comacchio products, but the after sales service and parts to match.
Available Soon!
Comacchio GEO 305
SN 5746
| GEO 305 SN 5746 Technical Specification | |
| Engine Power | 55.4 kW (75 HP) |
| Variable Width Undercarriage Weigth | 1,400 – 1,700 mm |
| Weight | Approx 5,000 Kg |
| Mast Height | 5,100 mm |
| Mast Stroke | 3,500 mm |
| Crown Block Extension | Suitable for handling 6m rods |
| Feed Force | 5,000 daN |
| Retract Force | 5,000 daN |
| Rotary Torque Max | 6,300 Nm |
| Rotary Speed Max | 750 rpm |
| Double Clamps/Breakout Range | 45 – 305 mm |
| Double Clamps Casing Extractor | 10,000 daN – 300 mm stroke |
| Wireline Winch Pull (Max) | 800 Kg |
| Service Winch Pull (Max) | 2,000 Kg |
| Triplex Pump Spec | 160 l/min @ 50 bar |
| Auto SPT | DPP Percussion hammer option |
| Radio Remote Control Drilling/Tracking | Rod Pack on side of rig |
| DTH Lubricator | Hydraulic air-gate valve |
Comacchio GEO 305
SN 5747
| GEO 305 SN 5747 Technical Specification | |
| Engine Power | 55.4 kW (75 HP) |
| Variable Width Undercarriage Weigth | 1,400 – 1,700 mm |
| Weight | Approx 5,000 Kg |
| Mast Height | 5,100 mm |
| Mast Stroke | 3,500 mm |
| Crown Block Extension | Suitable for handling 6m rods |
| Feed Force | 5,000 daN |
| Retract Force | 5,000 daN |
| Rotary Torque Max | 6,300 Nm |
| Rotary Speed Max | 750 rpm |
| Double Clamps/Breakout Range | 45 – 305 mm |
| Double Clamps Casing Extractor | 10,000 daN – 300 mm stroke |
| Wireline Winch Pull (Max) | 800 Kg |
| Service Winch Pull (Max) | 2,000 Kg |
| Triplex Pump Spec | 160 l/min @ 50 bar |
| Auto SPT | DPP Percussion hammer option |
| Radio Remote Control Drilling/Tracking | Rod Pack on side of rig |
| DTH Lubricator | Hydraulic air-gate valve |
Comacchio MC 4D
SN 5748
| MC 4D SN 5748 Technical Specification | |
| Tier 3 Engine Power | 86 Kw (115 HP) |
| Variable Width Tracked Undercarriage | 850 – 1,150 mm |
| Weight | 5,200 Kg (approx.) |
| Modular Mast (Max) Height | 2,997 mm |
| Modular Mast (Max) Stroke | 1,700 mm |
| Modular Mast (Min) Height | 2,197 mm |
| Modular Mast (Min) Stroke | 900 mm |
| Feed Force | 3,500 daN |
| Retract Force | 3,500 daN |
| Rotary Torque Max | 13,500 Nm |
| Rotary Speed | 155 rpm |
| Double Clamps Range | 45 – 325 mm |
| Winch Line Pull (Max) | 1,000 Kg |
| 20 metres hose kit | |
| DTH Lubricator | |
| Rubber pads for tracks | |
| New Version Radio Remote control set-up, drilling and tracking | |
| Pre-setting for Double Head | |
| Pre-setting for Jet Grouting | |
| Pre-setting Top Hammer | |
Comacchio MC 6 (SOLD)
SN 5642
| MC 6 SN 5642 Technical Specification | |
| Tier 3 Engine Power | 93 kW (125 HP) |
| Variable Width Tracked Undercarriage | 1,100 – 1,600 mm |
| Weight | 6,500 Kg (approx.) |
| Modular Mast (Max) Height | 3,425 mm |
| Modular Mast (Max) Stroke | 2100 mm |
| Modular Mast (Min) Height | 2,225 mm |
| Modular Mast (Min) Stroke | 900 mm |
| Feed Force | 5,000 daN |
| Retract Force | 5,000 daN |
| Rotary Torque Max | 13,500 Nm |
| Rotary Speed | 155 rpm |
| Double Clamps Range | 45 – 325 mm |
| Winch Line Pull (Max) | 2,000 Kg |
| 20 metres hose kit | |
| DTH Lubricator | |
| Rubber pads for tracks | |
| New Version Radio Remote control set-up, drilling and tracking | |
| Pre-setting for Jet Grouting | |
| Pre-setting Top Hammer | |
| Pressure Cleaner & Pump | |
Comacchio MC 15
SN 5749
| MC 15 SN 5749 Technical Specification | |
| Tier 3 Engine Power | 119 Kw (160 HP) |
| Tracked Undercarriage Width | 2,300 mm |
| Weight | 14,500 – 16,500 Kg |
| Modular Mast (Max) Height | 6,000 mm |
| Modular Mast (Max) Stroke | 4,100 mm |
| Feed Force | 8,000 daN |
| Retract Force | 8,000 daN |
| Rotary Torque Max | 20,500 Nm |
| Rotary Speed | 100 rpm |
| Double Clamps with Casing Extractor Range | 85 – 530 mm |
| Casing Extractor Force | 10,000 daN |
| Casing Extractor Stroke | 400 mm |
| Winch Line Pull (Max) | 2,000 Kg |
| Front of Wall System | |
| Pump and High Pressure Cleaner | |
| DTH Lubricator | |
| New Version Radio Remote control set-up, drilling, tracking and rod carousel | |
| Pre-setting for Double Head | |
| Pre-setting for Jet Grouting | |
| Pre-setting Top Hammer | |
Drilltechniques is proud of its partnerships with some of the worlds most renowned manufacturers of Drilling Equipment such as Comacchio and Techniwell. Whether you are seeking quality equipment to conduct drilling operations for bored piers, CFA, anchoring, geotechnical, exploration, geothermal, well drilling or earthing, Drilltechniques can assist with high technology and high quality equipment. We also support drilling methods like Jet Grouting and CFA with material supply, mixing, grouting and pumping solutions.
If you would like to know more about the full range of equipment we offer, please choose from the relevant area above or call or email drillsales@drilltechniques.com.au.